DIN EN 1092-2-1997
|
ID： |
252B5D82D03F4BF9B123ED1CE2B25275 |
|
文件大小(MB)： |
1.54 |
|
页数： |
45 |
|
文件格式： |
|
|
日期： |
2007-12-7 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
DEUTSCHE NORM J- u-n- - e- 1- 9-,accessories, PN designated,Part 2: Cast iron flanges,Descriptors: Pipework, flanges, cast iron.,Supersedes,DIN 2530 : 1976-02.,DIN 2531 : 1976-02,DIN 2532 : 1976-02.,DIN 2533 : 1976-02,Flansche und ihre Verbindungen - Runde Flansche fur Rohre, Armaturen, DIN 2534: 1976-02,Formstucke und Zubehorteile, nach PN bezeichnet - Teil2: GuReisenflansche DIN 2535 : 1976-02,DIN 28604: 1990-01,DIN 28605 : 1990-01,DIN 28606 : 1990-01,and DIN 28607: 1990-01,and parts of,DIN 2500: 1966-08,DIN 2501 -1 : 1972-02,and DIN 2526: 1975-03.,I European Standard EN 1092-2: 1997 has the status of a DIN Standard.,A comma is used as the decimal marker.,National foreword,This standard has been prepared by GEN/TC 74.,The responsible German body involved in its preparation was the NormenausschuB Rohre, Rohrverbindungen und,Rohrleitungen (Pipes, Pipe Joints and Pipelines Standards Committee), Technical Cozmittee Flansche und ihre,Verbindungen.,The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are as follows:,IS0 Standard DIN Standard,IS0 13 DIN 28500,IS0 185 DIN 1691,IS0 468 DIN 4763,IS0 1083 DIN 1693-1 and DIN 1693-2,IS0 2531 DIN EN 545,IS0 5458 DIN IS0 5458,IS0 6708 DIN EN IS0 6708,Amendments,The standards listed in the Superseding note have been superseded by the specifications of EN 1092-2.,Previous editions,DIN 2500: 1928-10, 1949~-091, 966-08; DIN 2501: 1926-07, 1927-10, 1928-01, 1942-11, 1949-06; DIN 2501-1: 1970-1 1,1972-02; DIN 2502: 1926-07,1928-01,1931-04,1942-1 I , 1949-06; DIN 2503: 1926-07.1927-1 0,1942-1 1, 1949-06;,DIN 2504: 1928-04, 1942-1 1, 1949-06; DIN 2508: 1926-07; DIN 2526: 1963-1 1, 1975-03; DIN 2530: 1926-07, 1943-05,1949-1 2, 1967-06, 1976-02; DIN 2531: 1926-01, 1927-1 0, 1943-05, 1949-1 2, 1967-06, 1976-02; DIN 2532: 1926-07,1928-01, 1931 -04, 1934-09, 1935-02, 1943-05, 1949-12, 1967-06, 1976-02; DIN 2533: 1926-07, 1943-05, 1949-12,1967-06, 1976-02; DIN 2534: 1926-07, 1943-05, 1949-12, 1967-06, 1976-02; DIN 2535: 1926-07, 1943-05, 1949-1 2,1967-06, 1976-02; DIN 28504: 1963-07, 1965-08; DIN 28505: 1963-07, 1965-08; DIN 28506: 1970-1 1 ;,DIN 28507: 1970-1 1; DIN 28604: 1970-1 1, 1976-03, 1990-01; DIN 28605: 1970-1 1, 1990-01; DIN 28606: 1970-1 1,1990-01 ; DIN 28607: 1970-1 1,1990-01.,Continued overleaf.,EN comprises 43 pages.,DIN Deutsches lnstitut firr Normung e.V., Berlin.,Beuth Verlag GmbH. Berlin, has the exclusive right of sale for German Standards (DIN-Normen). English price group 74 Sales No. 7,0,Page 2,DIN EN 1092-2 : 1997-06,National Annex NA,Standards referred to,(and not included in Normative references),DIN 1691,DIN 1693-1,DIN 1693-2,DIN 4763,DIN 28500,DIN EN 545,DIN EN 598,DIN EN IS0 6708,Grey cast iron - Properties,Spheroidal graphite cast iron - Unalloyed and low alloy grades,Spheroidal graphite cast iron - Unalloyed and low alloy grades - Properties of cast-on test piece,Grading of values for surface roughness parameters,Cast iron pressure pipes and fittings -Technical delivery conditions,Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test,methods,Ductile iron pipes, fitting, accessories and their joints for sewerage application - Requirements and test,methods,Pipework components - Definition and selection of DN (nominal size) (IS0 6708: 1995),EUROP STAN D,@ NORME EUROPEENNE,EUROPAISCHE NORM,EN 1092-2,April 1997,ICS 23.040.60,Descriptors: Pipework, flanges, cast iron.,English version,Flanges and their joints,Circular flanges for pipes, valves, fittings and,accessories, PN designated,Part 2: Cast iron flanges,Brides et leurs assemblages - Brides circu- Flansche und ihre Verbindungen - Runde,laires pour tuyaux, appareil de robinetterie, Flansche fur Rohre, Armaturen, Formraccords,et accessoires, designees PN - stijcke und Zubehorteile, nach PN,Partie 2: Brides en fonte bezeichnet - Teil 2: GuBeisenflansche,This European Standard was approved by CEN on 1996-12-29.,CEN members are bound to comply with the CENICENELEC Internal Regulations which,stipulate the conditions for giving this European Standard the status of a national standard,without any alteration.,Up-to-date lists and bibliographical references concerning such national standards may be,obtained on application to the Central Secretariat or to any CEN member.,The European Standards exist in three official versions (English, French, German). A version in,any other language made by translation under the responsibility of a CEN member into its own,language and notified to the Central Secretariat has the same status as the official versions.,CEN members are the national standards bodie……
……